Faculty Information

■ Specialization and related fields

Mechanics of materials and materials, Composite materials and interfaces

■ Business career

1.

2021/04～

Aoyama Gakuin University College of Science and Engineering Department of Mechanical Engineering Assistant Professor

■ Belonging society

1.

2021/10～

The Japan Society for Aeronautical and Space Sciences

■ Book and thesis

1.	Article	Examination of Optimal Subset Size Selection in Digital Image Correlation Advanced Experimental Mechanics (Collaboration) 2024
2.	Article	Finite strain measurement and stress evaluation for thin plate specimen using digital image correlation Material System 41,pp.3-10 (Collaboration) 2024
3.	Article	J-integral Evaluation for Finite Strain Elastic-plastic Solid from Displacements Measured Using Digital Image Correlation Advanced Experimental Mechanics (Collaboration) 2024
4.	Article	Novel snap-lock fastener using 3D printed composites Agora of Additive Manufacturing (Collaboration) 2024
5.	Article	Evaluating the Effect of Fillers on the Crack Growth Behavior of Natural Rubber under High Load Condition Materials System 40,pp.69-74 (Collaboration) 2023
6.	Article	Generation of Simulation Images Based on Finite Element Results for Performance Evaluation of Digital Image Correlation Advanced Experimental Mechanics 8,pp.53-61 (Collaboration) 2023
7.	Article	Photo/Thermo-Curing 3D Printing of High Thermal Conductivity CFRP with Pitch-Based Short Carbon Fibers pp.166-171 (Collaboration) 2023
8.	Article	Nonlinear behavior mechanism of change in electrical resistance on 3D printed carbon / PA6 composites during cyclic tests Advanced Composite Materials (Collaboration) 2022
9.	Article	Estimation of nonlinear piezo resistance behavior of 3D printed composites using artificial neural network REINFORCED PLASTICS pp.191-197 (Collaboration) 2021
10.	Article	Reverse piezo resistivity of 3D printed continuous carbon fiber / PA6 composites in a low stress range Advanced Composite Materials 30(4),pp.380-395 (Collaboration) 2021
11.	Article	Development of a three-dimensional finite element model for a unidirectional carbon fiber reinforced plastic based on X-ray computed tomography images and the numerical simulation on compression Advanced Composite Materials 28(1),pp.73-85 (Collaboration) 2019
12.	Article	Simulation on Kink-band formation during axial compression of a unidirectional carbon fiber reinforced plastic constructed by X-ray computed tomography images Advanced Composite Materials 28(4),pp.347-363 (Collaboration) 2019
13.	Other	3D printing of Continuous fiber reinforced polymer composites: Development, Application, and Prospective Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers 1(1),pp.100016 (Collaboration) 2022
Display 5 items
Display all(13)

■ Academic conference presentation

1.	2024/07/11	Observation of Crack Acceleration and Deceleration Phenomena in Rubber Using Digital Image Correlation (13th International Conference on Mechanics of Time-dependent Materials)
2.	2024/07/10	Delamination Inhibition in Unidirectional CFRP Laminates with PLY Discontinuities (13th International Conference on Mechanics of Time-dependent Materials)
3.	2024/07/10	Effect of Moisture Absorption on Mechanical Properties of 3D Printed Thermoplastic Materials (13th International Conference on Mechanics of Time-dependent Materials)
4.	2024/07/04	Suppression of Delamination in CFRP Laminates with Ply Discontinuities Using Polyamide Mesh Material (21th European Conference on Composite Materials)
5.	2023/11/25	Examination of Optimal Subset Size Selection in Digital Image Correlation (International Workshop on Advanced Experimental Mechanics for Students and Young Researchers 2023)
6.	2023/11/24	Identifying Viscoelastic Constitutive Parameters Using the Stress Sensitivity Based Virtual Fields Method (International Workshop on Advanced Experimental Mechanics for Students and Young Researchers 2023)
7.	2023/10/11	Evaluation of the Relation between Optimal Subset Size and Systematic Errors in Digital Image Correlation (The Advanced Technology in Experimental Mechanics and International DIC Society Joint Conference 2023)
8.	2023/10/11	Identiifying Viscoelastic Constitutive Parameters Using The Stress Sensitivity Based Virtual Fields Method (The Advanced Technology in Experimental Mechanics and International DIC Society Joint Conference 2023)
9.	2023/10/11	Investigation of Bending Fracture Behavior of CFRTP Laminates with Fiber Discontinuities (The Advanced Technology in Experimental Mechanics and International DIC Society Joint Conference 2023)
10.	2023/10/11	Quantitative Evaluation of the Effect of Fiber Breakage on Elastic Modulus of 3D-printed Thin CFRP (The Advanced Technology in Experimental Mechanics and International DIC Society Joint Conference 2023)
11.	2022/09/08	Evaluating the Effect of the Filler Amount on the Crack Growth Behavior of Natural Rubber and the Strain Distribution (BSSM 16th International Conference on Advances in Experimental Mechanics)
12.	2022/09/08	Measurement Discontinuous Strain Around the Dissimilar Materials Interface Using Global Digital Image Correlation (BSSM 16th International Conference on Advances in Experimental Mechanics)
13.	2022/06/13	Evaluating the Effect of the Carbon Black on the Crack Growth Behavior of Natural Rubber Sheets with Large Deformation and the Strain Distribution (2022 SEM Annual Conference and Exposition on Experimental and Applied Mechanics)
14.	2022/06/13	Evaluation of Stress State and Fracture Strain of High-strength Steel Using Stereo Image Correlation (2022 SEM Annual Conference and Exposition on Experimental and Applied Mechanics)
15.	2022/06/13	Measuring Strain Distribution Around Inclusions and Matrix Interface Using Global Digital Image Correlation (2022 SEM Annual Conference and Exposition on Experimental and Applied Mechanics)
16.	2021/12/01	Investigation of fracture behavior of 3D printed materials with various interlayer strength (sampe JISSE-17 symposium)
17.	2021/09/08	Evaluating the Effect of the Filler Amount on the Crack Growth Behavior of Rubber and the Strain Distribution in the Vicinity of a Crack (BSSM 15th International Conference on Advances in Experimental Mechanics)
18.	2020/03/16	Self-sensing of 3D printed carbon fiber reinforced plastics (Student workshop on 3D-printing composites)
19.	2019/09/22	Wireless self-sensing of compressive damage for 3D printed composites (SAMPE university research symposium)
20.	2019/09/06	Self-Sensing of 3D printed continuous fiber reinforced plastics (第44回複合材料シンポジウム)
21.	2019/08/12	Strain measurement of 3D printed short carbon fiber reinforced plastics using electric property (22nd International Conference on Composite Materials)
22.	2017/08/29	Construction of a three-dimensional finite element model and the simulation of compression of a unidirectional carbon fiber reinforced plastic using X-ray computed tomography (6th Pacific-Asia conference on mechanical engineering)
23.	2017/06/05	Numerical simulation for longitudinal compression of a unidirectional carbon fiber reinforced plastic constructed by X-ray computed tomography (6th JSME/ASME 2017 International Conference on Materials and Processing)
Display 5 items
Display all(23)